kvmstats.blogg.se

You can configure the PowerConnect settings from this interface. If password protection is enabled on the switch, you will need to enter root as the user with the password that is assigned to the switch.Type open, where is the IP Address of the switch.The telnet session will start and you will be at a Microsoft Telnet prompt.The command prompt appears and then press the key. Click the Start button, and then click Run.In the Main Menu, configure the PowerConnect settings.Ĭonnect to the Switch From a Telnet Session.If password protection is enabled on the switch, type root as the user and type the password that is assigned to the switch.

The default IP Address is the IP address of the switch, and then press For more information about changing the IP address of your Dell PowerConnect switch, refer to the Dell Knowledge Base Article How do I change the IP address of my Dell PowerConnect 3024 or 5012 switch The default IP address on the switch is 192.168.0.1 with a subnet mask of 255.255.255.0. The Dell PowerConnect 30 managed switches use an embedded Web server that allows for management tasks to be accomplished from Microsoft® Internet Explorer® version 4.01 (and higher) or Netscape Navigator 6.0 (and higher).Ĭonnecting to the Dell PowerConnect switches with the serial null-modem cable is the only way that you can watch the progress of the switch booting up. The Dell PowerConnect 3024, 3048, 5012, and 5224 switches can be managed through a Web browser, a Telnet session, or a serial null-modem cable. Connecting to the Switch From a Web Browser